|
| |
TM 9-2330-398-24
2-45. WIRING HARNESS COMPONENTS REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools and Lost Equipment
• Semitrailer bonded and grounded (refer to
• General mechanic's tool kit (Item 4, Appendix B)
TM 9-2330-39810).
Equipment Conditions:
Semitrailer uncoupled (refer to TM 9-2330-398-10).
WARNING
When
troubleshooting
an
electrical
malfunction
or
performing
electrical
maintenance, ALWAYS disconnect intervehicular electrical cable from semitrailer
and disconnect semitrailer negative battery cables at batteries. Failure to follow
this warning may create a spark and explosion, resulting in serious injury or death
to personnel.
a. REMOVAL
NOTE
Use illustration as reference when removing conduit. Where conduit passes under
clips, bend clips far enough back to remove conduit, but do not break off clips.
b. INSTALLATION
NOTE
Use illustration as reference when installing conduit. If enough clips break off to
hamper installation of conduit, notify Direct Support maintenance to weld on new
clips.
2-116
|
