|
| |
TM 9-2330-398-24
2-33.
BATTERY CABLE REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
• General mechanic's tool kit (Item 4,
• Semitrailer uncoupled (refer to TM 9-2330-398-10).
Appendix B)
• Battery cover and negative and positive battery
terminals removed (para 2-32).
WARNING
Battery acid (electrolyte) is extremely harmful. Always wear safety goggles and rubber gloves,
and do not smoke when performing maintenance on batteries. Injury will result if acid contacts
skin or eyes. Wear rubber apron to prevent damage to clothing.
a.
REMOVAL
1. Remove fastener (12) and two leads (14 and 19) from terminal (11).
2. Disconnect opposite end of lead (19) from semitrailer ground.
3. Remove fastener (15) and lead (14) from terminal (17).
4. Remove fastener (5) and lead (4) from terminal (9).
5. Remove fastener (3), lead (4), fastener (2), and lead (1) from terminal (10).
6. Disconnect opposite end of lead (1) from starter (20).
7. Remove fastener (16) and lead (18) from terminal (17).
8. Disconnect opposite end of lead (18) from engine ground.
9. Remove fastener (8), lead (6), wiring harness (7), and wiring harness (13) from terminal (9).
10. Disconnect opposite end of lead (6) from alternator.
11. Disconnect opposite end of wiring harness (7) from junction box solenoid.
12. Disconnect opposite end of wiring harness (13) from junction box circuit breaker.
2-80
|
