|
| |
TM 9-2330-272-14
5-11. FLOW SELECTOR VALVE MAINTENANCE (M131A4C AND M131A5C LATE MODEL)
(Con’t).
c.
CLEANING AND INSPECTION
WARNING
Dry cleanig solvent, P-D-680, Is toxic and flammable. Always wear protective goggles
and gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO NOT use near open flame or excessive heat.
The solvent’s flash point is 100°F138°F (38°C-59°). If you become dizzy while
using cleaning solvent, Immediately get fresh aird medical help. If solvent contacts
eyes, immediately wash your eyes and get medical aid.
1.
Clean parts in dry cleaning solvent. Dry thoroughly.
2.
Inspect parts for damage. Replace damaged parts.
d.
ASSEMBLY
1.
Install spring (8) and nut (7) on screw (9).
2.
Install spacer (13) on nut (7).
3.
Install disk retainer (14) in spacer (13).
4.
Install washer (6), new diaphragm (12), and housing (15) on valve body (10) with two screws (16).
5.
Install knob (11) on screw (9).
6.
Install spring (17), new gasket (18), and adapter (19) on housing (15).
TA702866
5-27
|
