|
| |
TM 9-2330-272-14
4-84. FILTER-SEPARATOR REPLACEMENT (M131A4C AND M131A5C EARLY MODEL).
This Task Covers:
a .
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Tank purged (para 4-64).
Eight Iockwashers
Piping disconnected from filter-separator (para 4-94).
Tools/Test Equipment:
Personnel Required: Two
General mechanic’s tool kit
Common no. 1 shop set
NOTE
M131A4C and M131A5C early model filter-separators are removed the same way
except M131A4C has one tube and M131A5C has three tubes.
1.
2.
3.
Disconnect three tubes (2) from filter-separator (1).
Position suitable lifting device under filter-separator (1).
Remove eight nuts (3), Iockwashers (4), screws (6), washers (5), two brackets (7), and filter-separator (1) from
semitrailer. Discard Iockwashers.
TA702806
4-176
|
