|
| |
TM 9-2330-272-14
4-50. LANDING GEAR LEG REPLACEMENT (Con’t).
8.
9.
10.
If removed, install nut (16) and clevis (13) on rod (27).
Install rod (27) on landing gear leg (9) with new Iockwasher (28) and screw (29).
Install rod (27) on crossmember with screw (12), new Iockwasher (14), and nut (15).
11.
12.
13.
14.
Install ground board. chain (7) on landing gear leg (9) with screw (8), two washers (5), and nut (6).
Torque nuts (4) to 60-70 Ib.-ft. (81 -95 N•m).
Lower landing gear legs (9) until shoes (21) contact ground.
Remove support from under front corners of frame (1).
TA702754
4-100
|
