|
| |
TM 9-2330-272-14
4-25. STORAGE BATTERY AND BATTERY CABLES MAINTENANCE (Con’t).
9.
Remove two nuts (27), screws (25), frame (26),
and battery (4) from rack (31).
10.
Remove four nuts (30), Iockwashers (29), screws
(28), negative cable (20), and rack (31) from
cabinet (10). Discard Iockwashers.
Refer to TM 9-6140-200-14 for instructions on
servicing battery.
c.
INSTALLATION
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Install rack (31) and negative cable (20) on
cabinet (10) with four screws (28), new lock-
washers (29), and nuts (30).
Position battery (4) in rack (31) and install frame
(26) on rack with two screws (25) and nuts (27).
Install positive cable (15) on starter solenoid (23)
with nut (24).
Install two grommets (22) in firewall (11). Thread
positive cable (15) through firewall.
Install negative battery terminal (19) on negative
cable (20) with screw (21) and nut (17).
Install positive battery terminal (13) on positive
cable (15) with screw (16) and nut (12).
Position positive battery terminal (13) on positive post of battery (4) and tighten nut (14).
Position negative battery terminal (19) on negative post of battery (4) and tighten nut (18).
NOTE
Steps 9 through 11 apply only to M131A5.
if removed, install strap (3) to loop (8) with new rivet (1) and two washers (2).
if removed, install loop (8) and strap (3) on cabinet (10) with two screws (9), washers (7), and new locknuts (6).
Position battery cover (5) on battery (4) and fasten two straps (3).
4-34
|
