|
| |
TM 55-4920-383-13&P
(14) Remove hex nut (5) and detach flat washer (56), gasket (50) and internal
coaxial cable assembly (57) from panel subassembly (61).
(15) Remove hex nut (6) and
(54) from panel subassembly (61).
(16) Remove hex nut (8) and
(53) from panel subassembly (61).
detach flat washer (55)
detach flat washer (52)
and internal coaxial cable assembly
and internal coaxial cable assembly
gasket (50) and internal coaxial
and internal coaxial cable
(17) Remove hex nut (10) and detach flat washer (51),
cable assembly (49) from panel subassembly (61).
(18) Remove hex nut (11) and detach flat washer (47)
assembly (48) from panel subassembly (61).
(19) Remove four screws (60) and detach two handles (62) from panel subassembly (61).
(20) Remove hex nut (44) and flat washer
subassembly (61).
4-8.
Cleaning.
WARNING
(43) and detach lampholder (13) from panel
Solvent (item 2, table 1-4) is toxic and flammable. Use in well ventilated area.
Avoid breathing of vapors and contact with skin. Keep away from flames and other
ignition sources.
Clean all parts, except electrical contacts, using a clean, lint-free cloth moistened in
ethyl alcohol (item 1, table 1-4). Remove stubborn deposits of dirt, grease and grime,
using solvent (item 2, table 1-4) and a soft-bristled brush; dry using compressed air, 15 psi
maximum. Clean electrical contacts using a dry lint-free cloth.
4-9.
Detailed Repair Instructions.
Detailed repair of the Test Set consists of replacing defective parts or assemblies. Refer
4-24
|
