|
| |
Test Kit for Captured Fuel
TM 5 6630 217-10
Visual Contamination level (cont)
Lines are approximately 1 mm of (0.04 in.) wide with a spacing of 5 mm (0.20
in.). The grid will cover one entire side of the module. Acceptable or "GO" fuel
is one In which the gird lines are fully visible when viewed through the fuel
sample.
TRANSIT CASE - HOUSING
The transit case is made d a semi rigid plastic material and serves as both a
protective case for the tester and as a potential sample collecting container. It
is constructed with a "spring leaf" shock absorption system to protect the tester
from damage due to rough handling.
Power and Utility Information
There is no power or utility requirement for operation of the tester, however a
flashlight or other similar light source may be used for night operation.
Environmental Information
The test kit may be used or disposed without danger to the environment. None
of the materials used are toxic, radioactive, explosive or poisonous. The small
quantities of hydrocarbons In each testor should present no problem even under
incineration.
List of items Furnished
The "Captured Fuel Test Kit" consists d three pieces:
1. Tester
2. Housing 3. Instruction Card
NSN 6630 01-248 5389
Other Items
The test kit is furnished complete and ready for operation. The only additional
item required is the fuel sample for testing No requirement for maintainability
exists as any test kit not functioning property shall be replaced in the field. No
or test equipment are required.
Warranty information
The test kit is warranted to meet the specifications set out In the purchase
document.
Page 6
|
