|
| |
TM 5-5430-219-13
4 Insert bottom plate (1) of sealing clamp through hole or tear; position
gasket (2) to side against tank.
Rotate plate until it is centered and
parallel to tear (View A).
5 Center top plate (3) of sealing clamp on threaded shank and directly
over bottom plate (1) (View B).
6 Grasp nylon cord (4) firmly while tightening wingnut (5).
7 Tighten wingnut to secure tank wall between two plates (View C).
a .
Tighten wingnut enough to stop leak.
b .
If pliers are used, do not over-tighten.
8 Remove nylon cord (4).
2-33/(2-34blank)
|
