|
| |
TM 5-5430-219-13
DISASSEMBLY (See figure 2-16.)
1 Disconnect female quick-disconnect coupling (1) from male flanged
adapter (2).
a .
Pull outward on cam-lever arms (3).
b .
Lift female quick-disconnect coupling (1) from male flanged
adapter (2).
2 Remove gasket (4).
3 Disconnect relief cap (5) from vent pipe (6). Rotate relief cap to the
left until threads disengage.
4 Remove relief cap gasket (7) from inside the relief cap (5).
INSPECTION
Carefully inspect gasket for deterioration, distortion, cracks, or breaks.
Replace when service is doubtful.
ASSEMBLY (See figure 2-16.)
1 Seat relief cap gasket (7) inside relief cap (5).
2 I n s t a l l r e l i e f c a p ( 5 ) o n v e n t p i p e ( 6 ).
Rotate relief cap to the right
until the two pieces are joined tightly together.
3 Seat gasket (4) in female quick-disconnect coupling (1).
4 With cam-lever arms (3) in outward position, install quick-disconnect
coupling (1) on male flanged adapter (2). Pull cam-lever arms inward
until they lock in place.
2-17.
MAINTMANCE OF FILLER/DISCHARGE ASSEMBLY.
T h i s t a s k c o v e r s : a.
Disassembly b. Assembly
NOTE
Repair of the filler/discharge assembly includes replacement of
the coupling half gaskets in the dust cap assembly and in the
quick-disconnect elbow.
2-28
|
