|
| |
REMOVAL
1 P u l l
(2) .
TM 5-5430-219-13
(See figure 3-11. )
outward on cam-lever arms (1) of female quick–disconnect coupling
2 Withdraw filler and discharge hose assembly (3) from filler and
discharge valve assembly (4).
SERVICE (See figure 3-11.)
1 Flush hose assembly with hot, soapy water.
2 Rinse thoroughly and air dry.
3 Inspect hose (5) for cracks, tears, or wear and ensure that hose bands
(6) are secure to couplings (7 and 8). Replace if necessary.
4 Inspect cam-lever arms (10) for distortion or breaks.
5 Inspect coupling gaskets (9) for deterioration or wear. Replace if
necessary.
INSTALLATION (See figure 3-11.)
1 Ensure that coupling gasket (9) is installed inside female quick-
disconnect coupling (2).
2 Connect filler and discharge hose assembly (1) to filler and discharge
valve assembly (4); push cam-lever arms (1) inward on female
quick-disconnect coupling (2).
3-13. MAINTENANCE OF DRAIN GATE VALVE.
This task covers: a. Removal
d. Assembly
b .
D i s a s s e m b l y e . I n s t a l l a t i o n
c .
Service
General Mechanic’s Automotive Tool Kit, SC 5180-90-CL-N26
Cleaning solvent, item 1, appendix E
Thread sealing compound, item 2, appendix E
Grease, item 5, appendix E
Rags, item 6, appendix E
Antiseize tape, item 9, appendix E
3-25
|
