|
| |
TM 5-5430-218-13
APPENDIX G
TORQUE LIMITS
Section I - INTRODUCTION
G-1 .
GENERAL.
This appendix lists standard torque values which are shown in
Table G-1.
Refer to these torque values only when specific torque value
information is not provided in the maintenance sections of this technical
manual.
Section II - TORQUE VALUES
Table G-1.
3,000 Gallon Collapsible Fabric Tank Torque Values
Item
1.
Assembly
Vent and Pipe
Assembly
Torque Value
75 inch lbs
Remarks
a.
Set torque wrench at 75 inch
lbs.
NOTE
Torque sequence number 1 (one)
can
be
started
at
any
bolt
position
of
Vent
and
Pipe
Assembly.
b.
Torque all bolts to 75 inch lbs
using the sequence in Figure
G-1.
Figure G-1
G-1
|
