|
| |
TM5-4930-237-10
a. Removal.
NOTE
A suitable container should be available to catch fuel spillage.
(1) Remove dust cap (1) from D1 nozzle (2),
(2) Remove retainer (3) and strainer (4) from D1 nozzle (2).
b. Cleaning. Wipe retainer (3) and strainer (4) with a clean cloth to remove dust, dirt, or fuel residue.
c. Inspection.
(1) Inspect retainer (3) and strainer (4) for cracks or distortion.
(2) If retainer (3) or strainer (4) are damaged D1 nozzle shall be replaced.
d. Installation.
(1) Install strainer (4) and retainer (3) in D1 nozzle (2).
(2) Using fingertips, push against end of retainer to seat parts in D1 nozzle (2).
(3) Install dust cap (1) on body (2).
3-14
Figure 3-2. D1 Nozzle Strainer Inspection
|
