|
| |
TM5-4930-235-13&P
c. Inspection.
(1) Inspect outlet cap (29) for corrosion, cracks, or distortion.
(2) Inspect o-ring (28) for cracks, cuts, tears, or distortion.
(3) Inspect wire rope (27) and sleeves (26) for corrosion, cuts, or fraying.
d. Replacement. All damaged parts shall be replaced.
e. Reassembly.
(1) If wire rope (27) was damaged, assemble new sleeves (26) and wire rope (27) as follows:
(a) Slide one sleeve (26) on wire rope (27).
(b) Insert end of wire rope (27) through hole in outlet cap (29).
(c) Form a loop with wire rope (27) and slide sleeve (26) over end of wire rope (27).
(d) Crimp sleeve (26) to wire rope (27).
(e) Repeat steps (a), (b), (c) and (d) on other end of wire rope (27).
(2) Install o-ring (28) in groove of outlet cap (29).
f. Installation.
(1) Install outlet cap assembly (25) in end of nozzle (1).
(2) Attach other end of wire rope (27) to ring (13).
4-10
|
