|
| |
TM 54930-235-13&P
b. Disassembly. (Cam-Lock)
(1) Remove end of wire rope (16) from ring (13).
(2) Pull cam arms (30) outward from coupling half (20).
(3) Remove dust plug (18)..
(4) Remove end of wire rope (16) from ring (17).
(5) Remove ring (17) from dust plug (18).
(6) Remove gasket (19) from coupling half (20).
(7) Turn strainer body (21) counterclockwise and remove from strainer housing (24).
(8) Put coupling half (20) in vise with strainer body (21) pointing up. Using a strap wrench, remove strainer
body (21) from coupling half (20).
(9) Remove strainer (22) and O-ring (23) from strainer housing (24).
NOTE
Do not remove strainer housing from nozzle unless inspection indicates part requires
replacement.
(10) Turn strainer housing (24) counterclockwise and remove from nozzle (1).
(11) Wipe all parts with a clean cloth to remove dirt and fuel. Use a brass brush to remove thread sealing
compound.
c. Inspection. (CamLock)
(1) Inspect dust plug (18) for corrosion, cracks, or distortion.
(2) Inspect wire rope (16) and sleeves (15) for corrosion, cuts, or fraying.
(3) Inspect ring (17) for corrosion or distortion.
(4) Inspect gasket (19) for cuts, tears, or distortion.
(5) Inspect coupling half (20) as follows:
(a) Cam arms for cracks or distortion.
(b) Coupling for cracks, distortion, or damaged threads.
(6) Inspect strainer body (21) and strainer housing (24) for cracks, distortion, or damaged threads.
(7) Inspect strainer (22) for cracks, distortion, or damage to screen.
(8) Inspect o-ring (23) for cuts, tears, or distortion.
Change 1
4-7
|
