|
| |
TM 5-4930-234-13&P
Figure 3-1. Cam-Lock Gasket Replacement
3-5.
UNISEX COUPLING SEALS (See Figure 3-2).
a.
Removal.
1.
Shut fuel off at source. Place handle down in NO FLOW (off) position.
NOTE
Have a suitable container available to catch any fuel spillage.
2.
Place handle (6), on fuel hose coupling, in NO FLOW position.
3.
Pull ring (3) toward nozzle (1). Turn nozzle (1) clockwise and remove from fuel hose.
4.
Remove seals (4) from inside coupling (2).
b.
Inspection. Inspect seals (4) on coupling and dust cap for cuts, tears, or distortion.
c.
Replacement. Replace seals (4) if damaged.
3-3
|
