|
| |
TM 5-4930-234-13&P
NOTE
If nozzle must be kept in continuous operation, check and service only those items that can be checked
and serviced without disturbing operation. Make a complete checks and services when nozzle can be
shut down.
Table 2-1. Operator Preventive Maintenance Checks and Services
NOTE: Within designated interval, these checks are to be performed in the sequential order listed.
B—Before
D—During
A—After
W--Weekly
M--Monthly
Procedures
For Readiness
Reporting,
Item
Interval
Item to be
Check For and Have
Equipment is Not
No.
B D A W M
Inspected
Repaired or Adjusted
Ready/Available if:
1.
* * *
*
Nozzle Assy
Check for damaged body, signs
Outward signs of
of leaks or cracks.
damage.
2.
*
*
*
Cap Assy
Check for signs of cracks,
N/A
loose or frayed cable.
3.
* * *
*
Ground Clip
Check for loose or frayed
Outward signs of
Assy
cable. Check for damage to
damage.
clip or cable eye.
4.
*
*
*
Coupling
Check for signs of cracks,
Outward signs of
Assy
loose or frayed cable. Check
damage.
to ensure coupling gasket is
in place.
5.
* * *
Cam-Lock
Check for loose coupling
Cam-Lock Coupling is
Coupling
or signs of leakage.
loose or leaking or
shows signs of leakage.
6.
* * *
*
Ground Plug
Check for loose or frayed
Outward signs of
Assy
cable. Check for damage to
damage.
plug or cable eye.
7.
*
*
*
Strainer
Check for damaged and/or
N/A
dirty screen.
Section III. OPERATION UNDER USUAL CONDITIONS
2-4.
CONNECTION OF NOZZLE, MODEL AE83206R. (See Figure 2-2.)
1.
Pull cam arms (1) away from coupling (2).
2.
Remove dust plug (3) from coupling (2).
3.
Slide end of fuel hose (4) into coupling (2).
4.
Push cam arms (1) against coupling (2).
Change 1 2-3
|
