|
| |
TM 5-4320-313-14
(2) Inspect flywheel for corrosion or cracks.
(3) Replace all parts that are damaged.
d. Installation.
(1) Install blower ring (12) on flywheel (9) and secure with six lockwashers (11) and six screws (10).
(2) Position flywheel (9) on the engine, aline all bolt holes on flywheel and crankshaft and secure with four
lockwashers (8) and four screws (7).Torque screws to 51.60 ft-lbs (70 Nm).
(3) Install stub shaft (6) on flywheel (9) and secure with three lockwashers (5) and three screws (4).
(4) Install housing (3) on engine and secure with four lockwashers (2) and four screws (1).
(5) Refer to paragraph 5-4 and install pump assembly.
Figure 5-31. Flywheel Removal/Installation.
5-45
|
