|
| |
TM 5-4320-308-13
3-17. REPLACE Y-CONNECTORS
This task covers:
Cleaning/Inspection
INITIAL SETUP
Materials/Parts
Diesel fuel oil (Item 2, Appendix E)
Equipment
General Safety Instructions
Condition
Para
Condition Description
Well-ventilated area required.
2-1
Y-Connectors removed
from pumping assembly
CLEANING/INSPECTION:
WARNING
Death or serious injury could occur if fuel is not handled carefully. Use in a well-ventilated area
away from open flame, arcing equipment, ignition sources, heaters, or excessive heat. Always
store fuel in proper, marked containers. DO NOT SMOKE.
Death or serious injury could occur if compressed air is directed against the skin. Do not use
compressed air for cleaning or drying unless the pressure is/has been reduced to 30 psi (2. 06
bar) or less. When working with compressed air always use chip guards, eye protection, and other
personal protective equipment.
1
Clean Y-connectors with clean diesel fuel and dry with compressed air.
2
Inspect for cracks, signs of deterioration, and obvious damage.
Replace Y-connectors if' damaged.
3-40
|
