|
| |
TM 5-4320-308-13
3-1. CHECKING ENGINE OIL (Continued)
d.
If oil coating extends above top mark, loosen
drain plug (1), drain enough oil to lower oil level
to top mark on dipstick, then tighten drain plug
securely.
Section II. REPAIR PARTS, SPECIAL TOOLS TMDE,
AND SUPPORT EQUIPMENT
3-2. COMMON TOOLS AND EQUIPMENT
For authorized common tools (standard and metric) and equipment, refer to the Modified Table of Organization and
Equipment (MTOE) applicable to your unit.
3-3. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
The special tools required to service the pumping assembly are listed and illustrated in TM 5-4320-308- 23P, Repair
Parts and Special Tools List (RPSTL).
3-4. REPAIR PARTS
Repair parts are listed and illustrated in TM 5-4320-308-23P.
Section III. SERVICE UPON RECEIPT OF EQUIPMENT
3-5. UNLOADING EQUIPMENT
a.
Before attempting to unload the pumping assembly, make sure that the unloading facility is capable of handling
455 pounds (206 kilograms).
b.
Remove shipping tiedowns.
3-2
|
