|
| |
TM 5-4320-308-13
4-18.
INSPECT/REPLACE CYLINDER (Continued)
INSTALLATION:
1 Install piston (1) in accordance with paragraph 4-19. Apply lubricating oil to piston rings
2 Check that piston rings are offset by 120 degrees
3 Compress piston rings with piston ring clamp 666 346 00 (2).
CAUTION
When installing cylinder, make sure piston or connecting rod does not knock
against crankcase. This could result in serious damage to piston or connecting
rod.
Use care when installing cylinder to prevent damage to piston rings.
4
Apply lubricating oil to inside of cylinder (3) and slowly mount cylinder on studs (4).
5
Remove piston ring clamp 666 346 00 (2).
4-52
|
