|
| |
TM 5-4320-308-13
4-17. INSPECT/REPLACE CYLINDER HEAD AND VALVE ASSEMBLY (Continued)
9
Remove pushrod (1) and complete pushrod (2)
from protection tubes (3).
10
Remove
protection
tubes
(3),
preformed
packings (4), shims (5), and pressure springs (6).
NOTE
Complete pushrod (2) belongs to injection
pump side of engine.
DISASSEMBLY:
CAUTION
Do not scratch the cylinder head
sealing face. Scratches could cause
poor sealing of cylinder head and
cylinder.
1
Press down cup (1) and remove collets (2).
2
Remove valve spring (3), washer (4), and cap (5).
3
Remove valve (6) from cylinder head (7).
4-40
|
