|
| |
TM 5-4320-306-24
4-4. REPAIR INJECTION PUMP (Continued)
68
Apply a thin coat of sealing compound to new
gasket (52).
69
Position housing (51) onto injection pump.
70
Install six lockwashers (50) and six screws (49)
Torque screws to 52 to 69 in-lb (5.9 to 7 8 N-m)
71
Place woodruff key (27) in camshaft.
72
Push flyweight (26) firmly onto taper of camshaft
73
Install lockwasher (25) and annular nut (24) onto
camshaft Torque annular nut to 36 to 43 ft-lb (48.8
to 58.3 N-m) using flyweight pin wrench EFEP
187A and torque wrench.
74
Install retaining plate (30), lockwasher (29), and
screw (28).
4-32
|
