|
| |
TM 5-4320-306-24
3-16. REPAIR TURBOCHARGER (Continued )
CAUTION
Do not bend the rotor shaft.
4
Position shaft and turbine wheel assembly (11)
in a holding fixture.
5
Using a double universal socket and tee handle,
remove locknut (12).
6 Remove compressor wheel (13).
7
Remove screws (14).
8
Remove compressor backplate (15) and preformed packing (16).
9
Press flinger sleeve (18) and spacer sleeve (19) out of compressor backplate (15).
10
Remove and discard piston rings (17).
11
Remove oil deflector (20), thrust bearing (21), thrust ring (22), snap rings (23), and bearing (24).
12
Remove bearing housing (2), snap rings (25), bearing (26), and heat shield (27).
13
Remove and discard piston rings (28).
14
Remove shaft and turbine wheel (11).
CLEANING:
1
Before cleaning turbocharger components, inspect all parts for signs of burning, rubbing, or other damage which
might not be evident after cleaning.
3-75
|
