|
| |
TM 5-4320-306-24
3-10. REPLACE/REPAIR OIL PAN ASSEMBLY
This task covers
a
Removal
c
Repair
b
Cleaning/inspection
d.
Installation
INITIAL SETUP
Tools
Shop set, automotive repair, field
maintenance, basic
Materials/Parts
Diesel fuel oil (Item 6, Appendix C)
Sealing compound (Item 15, Appendix C)
Equipment
Condition
Para
Condition Description
2-29
Oil drain assembly removed from
oil pan Plywood board in place.
Special Environmental Conditions
Well-ventilated area required for cleaning
REMOVAL
1 From the rear of the skid, slide a plywood
(3.2 x
482.6 x 1219.2 mm) between the oil pan and
not rest
on, crimp, or damage any fuel lines or fittings
tank to
protect it from damage.
2 Remove screws (1), washers (2), and
bushings (3) from the oil pan (4) and
lower the assembled oil pan onto the
plywood board.
3 Remove intermediate bottom (5) and
upper gasket (6) from the engine
crankcase.
4 Slide oil pan (4) from under the
engine. Remove lower gasket (7) from
oil pan (4).
3-50
|
