|
| |
TM 5-4320-306-24
2-38. REPLACE/REPAIR TOOL BOX (AND COMPONENTS) (Continued)
INSPECTION/REPAIR:
1 Inspect tool box (1) and top (2) for minor dents, rust, corrosion, or other damage. Repair minor dents. If severely
damaged, replace tool box. If there are holes in box (1) and/or top (2), replace as required.
2
Inspect hinge (3), strikes (4), and catches (5) for damage or rust. If parts do not function properly, replace tool box.
3
Check that mallet (6) and ground cable (7) are present, either in use or stowed. Obtain replacements if any parts are
missing.
4
Test ground cable (7) for electrical continuity. If cables and/or connectors are stripped or broken, replace them. Do
not try to repair broken cable.
5
Inspect hose (8). Replace if brittle, cracked, or deteriorated.
2 133
|
