|
| |
TM 5-4320-306-24
2-36. REPLACE EXHAUST MANIFOLD AND SUCTION PIPE (Continued)
WARNING
Handling hot exhaust system can cause severe burns. Allow unit to cool before handling.
1
To remove exhaust manifold (1), remove nuts (2) and washers (3) from studs (4)
2
Remove and discard gaskets (5).
3
Remove only damaged studs (4) from the engine block
4
Separate exhaust manifold sections (6) and remove compression rings (7)
5
Remove ether line from suction pipe (9).
6
Remove twelve nuts (10) and twelve toothed washers (11) from studs (12) at charge air pipe (13) end of suction
pipe (9).
7
Remove and discard gaskets (14)
8
Remove nuts (15) and washers (16) from studs (17) at intake manifold (18) end of suction pipe (9).
9
Remove and discard gaskets (19)
10
Remove suction pipe (9).
11
Remove only damaged studs (12) from the engine block
12
Loosen hose clips (20) and separate charge air pipe (13) and intake manifold (18) by removing rubber sleeve
(21)
2-127
|
