| |
TM 5-4320-306-24
2-34 TEST/REPLACE STARTER MOTOR
This task covers:
a. Removal
c.
Installation
b.
Test/Inspection
d.
Operational Check
INITIAL SETUP
Tools
Equipment
Condition
Shop equipment, automotive maintenance
Para
Condition Description
and repair, common no 1
Engine shut down and cool.
Tool kit, general mechanics automotive
2-13
Battery cables removed.
2-15
Starter electrical system wiring
removed
REMOVAL
1
Support starter (1) and remove three bolts (2) and three
washers (3)
2
Remove starter (1) with relay (4) attached
TEST/INSPECTION
Remove relay and starter Test and inspect relay If relay does not
activate when excited with ground and +24 vdc from 24 vdc power
supply, the unit is not operating properly Test starter with ground
and +24 vdc. Replace starter motor if necessary
INSTALLATION
1
Support starter (1) and relay (4) and install three bolts (2) and
three washers (3) Tighten bolts (2) securely
2
Install tagged electrical system wires and positive battery cable
in accordance with paragraphs 2-15 and 2-13. Tighten lug nuts
securely.
3
Install negative battery cable Tighten lug nuts securely.
2-119
|