|
| |
TM 5-4320-305-24
4-4. REPAIR INJECTION PUMP (Continued)
93
Hook free end of spring (22) onto lever arm (98).
94
Place governor cover (20) against housing (51). Install two bolts (19) and four screws (18). Torque the screws to
43
to 61 in-lb (4.9 to 6.9 N-m).
95
Install torque capsule (8) using torque capsule wrench KDEP 2968.
96
Install nut (7) onto torque capsule (8).
97
Install setscrew (13).
98
Install washer (12) and nut (11).
99
Install washer (10) and cap nut (9).
100
Install new gasket (6).
101
Install intermediate plate (5) and sealing plate (4).
102
Install cover (3).
103
Install two bolts (2) and two bolts (1).
104
Fill governor with clean engine oil through port at top of governor.
105
Install screw plug (31) in housing (51).
106
Install injection pump on engine in accordance with paragraph 3-13.
107
Bleed air from fuel system in accordance with paragraph 2-42.
108
Adjust the injection pump in accordance with paragraph 3-6.
4-36
|
