|
| |
TM 5-4320-305-24
3-17.
TEST/REPAIR STARTER MOTOR
This task covers:
a.
Test
c.
Cleaning/Inspection/
d.
Assembly
b.
Disassembly
Repair
e.
Operational Check
INITIAL SETUP
Test Equipment
Materials/Parts
Batteries (12 volt) (2 required)
Dry cleaning solvent (Item 17, Appendix C)
Starter switch w/leads
Rosin flux core solder (Item 16, Appendix C)
Tools
Equipment
Condition
Shop set, automotive repair, field
Para
Condition Description
maintenance, basic
2-34
Starter motor removed from engine.
TEST:
CAUTION
Under no-load condition the starter will exceed safe rpm.
Connect starter motor (1) in series with two fully charged 12-volt batteries (2) and connect a remote starting switch (3) as
shown. Energize starter by momentarily depressing switch; observe whether overrunning clutch drive (4) moves forward
and begins rotating at a high rate of speed. If it does not, consult the following symptom chart.
3-80
|
