|
| |
TM 5-4320-305-24
2-37. REPLACE DATA AND WARNING PLATES
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Materials/Parts
Shop equipment, automotive maintenance
Diesel fuel oil (Item 6, Appendix C)
and repair, common no. 1
Sealing compound (Item 15, Appendix C)
Tool kit, general mechanics automotive
Special Environmental Conditions
Well-ventilated area required for cleaning.
REMOVAL:
1 To remove data and warning plates mounted with rivets, tap out rivets and remove plate.
2 To remove data and warning plates mounted with sealing compound, pry off plate with a broad-blade putty knife.
3 To remove data and warning plates mounted with screws, lockwashers, and nuts, remove mounting hardware and
plate.
INSTALLATION:
1 To install data and warning plates mounted with rivets, install new plate with new rivets.
WARNING
Death or serious injury could occur if diesel fuel oil is not handled
carefully. Use in a well-ventilated area away from open flame,
arcing equipment, ignition sources, heaters, or excessive heat.
Always store fuel in proper, marked containers. DO NOT SMOKE.
2 To install data and warning plates mounted with sealing compound, clean mounting surface with diesel fuel oil, then
install new plate with sealing compound.
3 To install data and warning plates mounted with screws, lockwashers, and nuts, replace any rusted or corroded
mounting hardware. Install new plate with screws, lockwashers, and nuts.
2-141
|
