|
| |
TM 5-4320-305-10
2-7.
PREPARATION FOR MOVEMENT (Continued)
I.
Be sure that battery box assembly (1) and
tool box (2) are closed securely.
Section IV. OPERATION UNDER UNUSUAL CONDITIONS
2-8.
OPERATION IN EXTREME COLD
a.
Use proper engine oil for cold weather, Refer to paragraph 3-1.
WARNING
Ether is highly flammable. Do not use near sparks or open flames. Do not inhale fumes. Do not
actuate ether start kit more than once. Overloading the engine air housing with this highly
explosive fluid (ether) could result in an explosion.
b.
Use ether start kit to help start the engine
in extremely cold temperatures. The ether cylinder (1)
is located on the right side of the control panel
assembly. The control knob (2) is located at the neck of
the cylinder.
(1)
Just before starting engine, push in
and release the ether cylinder control
knob. This will inject a small amount
of ether into the engine air intake.
(2)
If engine does not start, do not use the
ether start kit again until all fumes
have evaporated; wait at least 5
minutes.
2-77
|
