|
| |
TM 5-4320-305-10
2-1.LOCATION AND DESCRIPTION OF INSTRUCTION AND WARNING PLATES
The pumping assembly has the following identification, instruction, and warning plates.
a.
Instruction plate. Mounted on the control
box on the control panel assembly. It displays operating
instructions for manual speed control mode and
automatic mode.
b.
Cold start warning plate. Located on the
side of the control panel assembly next to the ether
cylinder. Warns operator that ether release control knob
is used only for starting engine in cold weather.
c.
To be removed by designated personnel
only warning plates and strips. Located on the control
panel next to the control box and inside the control box.
These warning plates and strips warn that the control
box can only be removed by personnel designated to do
so.
.
2-8
|
