|
| |
TM 5-4320-304-14
TM 08922A-14/1
MAINTENANCE PROCEDURES
Section III.
3-4. CLEANING OR REPLACING AIR FILTER
REMOVAL:
1 Remove wing nut (1) and sealing washer (2).
2 Remove air filter top (3) and rain hood (4).
3 Wipe rain hood and top with a clean, dry cloth.
4 Remove air filter (5).
CLEANING:
Death or serious injury could occur if com-
pressed air is directed against the skin. Do
not use compressed air for cleaning or dry-
ing unless the pressure is/has been reduced
to 30 psi (2.06 bar) or less. When work-
ing with compressed air always use chip
guards, eye protection, and other personal
protective equipment.
Air pressure of greater than 30 psi (2.06 bar)
will damage the air filter.
The use of cleaning fluids will damage the air
filter.
1 Clean air filter (5) with air and/or warm water [70° to 100°F (21° to 38°C)]; or with a warm
water/mild detergent solution.
2 Rinse and allow filter to dry.
3 If air filter cannot be cleaned, replace
INSTALLATION:
it.
1 Install air filter (5) into rain hood (4) and place top (3) over air filter.
2 Aline hole in rain hood and top with threaded rod on base connector (6).
3-7
|
