|
| |
TM 5-4320-304-14
TM 08922A-14/1
6-6. REPLACE OIL SEAL (FLYWHEEL SIDE)
This task covers:
a. Removal
c. Installation
b. Cleaning/Inspection
INITIAL SETUP
Tools
Equipment
Shop set, automotive repair,
Condition
Para
field maintenance, basic
Condition Description
Auxiliary bush, oil seal
5-13
Flywheel removed from engine.
(60 x 75 mm
666
068
00
Materials/Parts
dia) support flywheel side
General Safety Instructions
Well-ventilated area required.
Grease (Item 3, Appendix E)
REMOVAL:
1
Remove support (1) by removing two security plates (2) and four hex screws (3). Discard pre-
formed packing (4).
2
Remove oil seal (5).
6-19
|
