|
| |
TM 5-4320-304-14
TM 08922A-14/1
6-5. REPAIR/REPLACE GOVERNOR
This task covers:
a. Removal
c. Installation
b. Cleaning
INITIAL SETUP
Tools
References
Shop set, automotive repair,
Para 6-7 Crankshaft
field maintenance, basic
Equipment
Extractor for gear, crankshaft
Condition
603
823
00
Para
Condition Description
Impact mandrel, gear on crankshaft
6-4
Timing cover and camshaft re-
666
069
00
moved from engine.
Special tool for governor spring
General safety Instructions
618
305
00
Well-ventilated area required.
Materials/Parts
Diesel fuel oil (Item 2, Appendix E)
Grease (Item 3, Appendix E)
Lubricating oil (Item 6, Appendix E)
REMOVAL:
1
2
3
4
5
6
7
Remove gearwheel (1) from crankshaft using crankshaft gear extractor 603 823 00.
Remove pins (2 and 3) from shaft (16).
Remove threaded pin (4) and hex nut (5) from governor lever (6).
Remove two hexagon nuts (7) and lever (8).
Remove hexagon nut (9) and friction disc (10).
Remove capsule (11), hex nut (12), plate
packing (15).
Press out shaft (16) from crankcase.
(13), and eccentric pin 14). Discard preformed
6-15
|
