|
| |
TM 5-4320-304-14
TM 08922A-14/1
5-13. lNSPECT/REPLACE/REPAIR FLYWHEEL (Continued)
CLEANING/lNSPECTION:
1
2
3
4
5
6
7
8
9
Death or serious injury could occur if fuel is not handled
carefully. Use in a well-ventilated area away from open
flame, arcing equipment, ignition sources, heaters, or exces-
sive heat. Always store fuel in proper, marked containers.
DO NOT SMOKE.
Death or serious injury could occur if compressed air is
directed against the skin.
Do not use compressed air for
cleaning or drying unless the pressure is/has been reduced
to 30 psi (2.06 bar) or less. When working with com-
pressed air always use chip guards, eye protection, and other
personal protective equipment.
Clean flywheel thoroughly with diesel fuel oil. Use wire brush if necessary.
Dry flywheel with compressed air.
Inspect flywheel for cracks, rust, corrosion, or other damage.
Replace damaged or cracked flywheel.
Clean blower ring thoroughly with diesel
blades.
Dry blower ring with compressed air.
fuel oil. Use a soft-bristle brush to clean blower ring
Inspect blower ring for cracks, rust, corrosion, or other damage.
Check for damaged, chipped, or broken blower blades.
If blades are damaged, cracked, or chipped, replace blower ring.
5-45
|
