|
| |
TM 5-4320-304-14
TM 08922A-14/1
5-11. lNSPECT/REPLACE CYLINDER (Continued)
INSTALLATION:
1
Install piston (1) in accordance with paragraph
5-12. Apply lubricating oil to piston rings.
2
Check that piston rings are offset by 120
degrees.
3
Compress piston rings with piston ring clamp
666 346 00 (2).
When installing cylinder, make sure piston or connecting
rod does not knock against crankcase. This could result in
serious damage to piston or connecting rod.
Use care when installing cylinder to prevent damage to
piston rings.
4
Apply lubricating oil to inside of cylinder (3) and slowly mount cylinder on studs (4).
5
Remove piston ring clamp 666 346 00 (2).
5-38
|
