|
| |
TM 5-4320-304-14
TM 08922A-14/1
5-10. lNSPECT/REPLACE CYLINDER HEAD AND VALVE ASSEMBLY (Continued)
6
Install new gasket (2) and cylinder head (1) on
cylinder.
7
Install rocker shaft (3) with rockers, two air
shields, fuel tank bracket, and lifting eye.
Install deflector (4).
8
Install four nuts (1) on four studs (2) and
tighten nuts equally and crosswise to a
torque of 47 foot-pounds (6.5 m·kg).
9 Adjust tappet clearance and decompression mechanism.
a. Put decompression lever (1) in position 0.
b. Turn engine clockwise when facing throttle control
level until compression resistance can be felt.
5-31
|
