Explanation of Columns in Section III

maintenance function the item is to be used with in

accordance with original manufacturing

column A through K of Section II.

standards. Rebuild is performed only when

b. Maintenance Level. This column shows the

required by operational considerations or other

lowest level of maintenance authorized to use the

paramount factors and then only at the depot

special tool or test equipment.

maintenance level. Rebuild reduces to zero the

c. Nomenclature. This column lists the name or

hours or miles the equipment, or component

identification of the tool or test equipment.

thereof, has been in use.

d. Tool Number. This column lists the

d. Tools and Equipment, Column (4). T h i s

manufacturer's code an part number, or Federal

column is provided for referencing by code the

stock number of tool or test equipment.

special tools and test equipment (Sec. III), required

to perform the maintenance functions (Sec. II).

B-4. Explanation of Columns in Section IV

e. Remarks,

Column (5) This column is

a. Reference Code. This column consists of two

provided for referencing by code the remarks (Sec.

letters separated by a dash (entered from col. 5 of

IV) pertinent to the maintenance functions.

Sec. II). The first letter references alpha sequence

B-13. Explanation of Columns in Section III

i n Col. 5 and the second letter references a

maintenance-function, Col. 3, A through K.

a. Reference Code. This column consists of a

b. Remarks. This column lists information

number and a letter separated by a dash. The

pertinent to the maintenance function to be per-

number references the T&TE requirements listed

formed (as indicated in Sec. II).

in Sectior II. The letter represents the specific

B-2