Explanation of Columns in Section III

K - REBUILD . The highest degree of material maintenance. It

consists of restoring equipment as nearly as possible to

new condition in accordance with original manufacturing

standards. Rebuild is performed only when required by opera-

tional considerations or other paramount factors and then only

at the depot maintenance category. Rebuild reduces to zero

the hours or miles the equipment, or component thereof, has

been in use.

d. Tools and Equipment. Column 4. This column is provided for

referencing by code the special tools and test equipment, (Section

III) required to perform the maintenance functions (Section II).

e. Remarks. Column 5. This column is provided for referencing

by code the remarks (Section IV) pertinent to the maintenance functions.

Explanation of Columns in Section III

B-3 .

a. Reference Code. This column consists of a number and a

letter separated by a dash. The number references the T&TE re-

quirements column on the MAC. The letter represents the specific

maintenance function the item is to be used with. The letter is

representative of columns A through K on the MAC.

b. Maintenance Category. This column shows the lowest level

of maintenance authorized to use the special tool or test equipment.

c. Nomenclature. This column lists the name or identification

of the tool or test equipment.

d. Tool Number. This column lists the manufacturer's code and

part number , or Federal Stock Number of tools and test equipment.

Explanation of Columns in Section IV

B-4

a. Reference Code. This column consists of two letters separated

by 6 dash, both of which are references to Section II. The first

letter references column 5 and the second letter references a mainte-

nance function, column 3, A through K.

b. Remarks. This column lists information pertinent to the mainte-

nance function being performed, as indicated on the MAC, Section II.

B-3