Section II. MAINTENANCE ALLOCATION CHART

required to perform the maintenance functions

c. Nomenclature. This column lists the name or

(sec. II). (Not Applicable)

identification of the tool or test equipment.

e. Remarks, C o l u m n (5). This column is

d. Tool Number. This column lists the

provided for referencing by code the remarks (sec.

manufacturer's code and part number, or Federal

IV) pertinent to the maintenance functions.

Stock Number of tools and test equipment.

B-3. Explanation of Columns in Section III

B-4. Explanation of Columns in Section IV

a. Reference Code. This column consists of a

a. Reference Code. This column consists of two

number and a letter separated by a dash. The

letters separated by a dash, both of which are

number references the T&TE requirements column

references to Section II. The first letter references

on the MAC. The letter represents the specific

column 5 and the second letter references a

maintenance function, column 3, A through K.

maintenance function the item is to be used with.

The letter is representative of columns A through K

b. Remarks. This column lists information

on the MAC,

pertinent to the maintenance function being

b. Maintenance Category. This column shows

performed, as indicated on the MAC, Section II.

the lowest level of maintenance authorized to use

the special tool or test equipment.

Section II. MAINTENANCE ALLOCATION CHART

B-2