Section II. CONTROLS

d u r i n g road or highway movement of the

Caution: The wheels and axle of the pump

pump.

are designed to move the pump into position at

the worksite and are not designed for use

2-4. Reinstallation after Movement

Refer to paragraph 2-2 for installation instructions.

Section

III.

CONTROLS

2-5. General

This section describes the various controls and

provides the operator / crew sufficient information

to insure proper operation of the reciprocating

pump.

2-6. Controls

The controls necessary for operation of the

r e c i p r o c a l pump are illustrated in figures 2-2

through 2-4, and described in table 2-1.

1. Throttle lever

2. Ignition switch

1. Fuel tank

3. Choke lever

2. Fuel shutoff valve

3. Fuel strainer

Figure .2-2. Engine fuel and ignition controls

Figure 2-3. Fuel shutoff valve and related parts.

2-3