 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 5-15. Pump Alinement
(7) Drain the oil from the crankcase.
(8) Close the fuel shutoff ,valve on the fuel
tank (fig. 3-17) and disconnect the fuel line at the fuel
filter (fig. 3-17).
b. If misalinement exists it can be corrected by
(9) Detach the engine coupling from the pump
shimming or adjusting the aligning screws on either the
coupling as shown by figure 6-5.
pump side, the engine side or both (fig. 5-3).
(10) Remove the engine (fig. 5-1).
Note
b. Install the engine following above steps in
When replacing the engine or the
reverse.
pump ensure that existing shims are
left in place or replaced exactly as
5-14. Pump
they were before. This will expedite
a. Remove the pump as follows:
pump alinement.
(1) Detach the pump coupling from the engine
c. After alinement has been ascertained tighten
coupling (fig. 6-5).
screws (fig. 5-3) and check alinement and gap once
(2) Remove all tubing and valves on the pump.
again (para 6-5).
(3) Remove pump (fig. 5-2).
b. To install pump, follow above steps in, reverse.
Figure 5-2. Pump, removal and installation.
5-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals