Section XIV. HOUSING ASSEMBLY AND FRAME

Section XIV. HOUSING ASSEMBLY AND FRAME

3-66. Lifting Bail and Toolbox

3-64. General

a. Remove the lifting bail (fig. 1-2) by removing

The engine is enclosed in a sheet metal assembly, with

doors at both sides to provide access. The pumping unit

the four nuts attaching it to the skid.

b. Clean and inspect.

is exposed.

c. Install in reverse order.

d. Remove the toolbox (fig. 1-4) by removing the

3-65. Housing Assembly

two bolts, and washers attaching it to the rear cross

beam on the skid.

Remove and install the housing assembly as shown in

e. Clean and inspect.

f. Install in reverse order.

Section XV. FIRE FIGHTING EQUIPMENT

Refer to paragraph 2-20 and service the dry chemical

type fire extinguisher.

3-39