Removal and Disassembly-continued - TM-5-4320-234-340087

TM 5-4320-234-34

(10) Remove the cover nuts (5) and gaskets

(6), from the studs (9 and 10). Remove the valve

(12) Remove the plug (21) and gasket (22);

chamber cover (7) and gasket (8).

remove the spring (23), washers (24), and oil pressure

(11) Remove the screws (11 and 13) and

relief valve (25). Remove the two screws (26) and

lockwashers (12 and 14) that secure the flywheel

lockwashers (27) securing the cover (28) to the cylinder

housing (15) to the cylinder block; remove the flywheel

block. Remove the cover and gasket (29).

housing. If the timing hole cover (17) or felt (18) is

(13) Press out the sleeve bearing (30) if it is

damaged, remove the attaching screw (16) and remove

worn or damaged. Remove the baffles (31 and 32),

these pieces. Press out the drive screw pointer (19) and

plugs (33, 34, and 35), ring dowels (36 and 37), and

ring dowel (20) if they are damaged.

studs (38,

4-21