|
| |
TM 5-4320-228-13&P
4-2.2.
Fuel Lines, Filter.
a.
Removal.
(1) Refer to figure 4-2.
Loosen finger nut (1) on yoke (2)
of fuel filter.
Swing yoke upward and remove fuel bowl (3) and filter
(4).
Figure 4-2.
Fuel line and filter removal.
(2) Disconnect fuel line (5) to fuel tank. Disconnect fuel
line (6) to engine.
(3
(3) Remove elbow (7).
(4) Remove nut (8) and screw (9).
Drycleaning solvent, P-D-680, used to clean parts
is potentially dangerous to personnel and property.
Avoid inhalation of fumes and repeated or prolonged
skin exposure.
Wash exposed skin thoroughly with
soap and water.
Use in well ventilated area away
from open flame or excessive heat. Flash point is
100°F (38°C).
b.
Cleaning and Inspection.
(1) Clean fuel filter, bowl assembly and fuel lines with
approved cleaning solvent and dry thoroughly.
(2) Inspect fuel filter, connector threads, bowl, and bowl
gasket for cracks, breaks, and other damage.
4-3
|
