|
| |
2-5.1
Hose Assemblies - Cont'd .
Identification:
Manufacturer's name or trade mark, quarter
and year of manufacture, the type working
pressure and the words "Hose, Liquid
Petroleum Fuels, Dispensing, Collapsible"
Use:
Provided in 250 ft. lengths, packed two to a
flaking box with the swivel. Flaking box
dimensions are 92-1/4 inch x 81-1/2 inch x 18-1/4
inch. The hose is used in the transfer hose
assembly.
b. 6-Inch Hose. Collapsible, Discharge (224 Units)
NSN 3835-01-210-5618
Figure:
2-32
Specification:
MIL-H-82127A
OD:
6-5/8 in., plus 1/8 in., minus 1/16in.
ID:
6 in., plus or minus 1/32 in.
Weight:
4-11/16 lb./ft. (maximum)
Working Pressure:
150 psi
End Adapters:
Hose to D.G. adapters per (97403) 13226E8269,
aluminum 6061-T6
Cover:
Synthetic rubber, not less than 5/64 in. thick
Reinforcement:
Cotton or synthetic fiber plies, extra
reinforcement extending 14" from each end
Hose Tube:
Synthetic rubber, not less than 5/64 inch thick
Color:
Sand Matte
Identification:
Manufacturer's name or trade mark, quarter
and year of manufacture, the type working,
pressure and the words "Hose, Liquid
Petroleum Fuels, Dispensing, Collapsible"
Use:
Provided in 50 ft. lengths and used in the tank
farm modules, contaminated fuel module,
tanker-truck receipt manifold, and the fuel
dispensing assembly
c. 6-Inch Hose. Non-Collapsible Suction (228 Units)
NSN 4720-01-210-5596
Figure:
2-33
Specification:
MIL-H-370E, Type II
OD:
6-7/8 in., plus 1/8 in., minus 1/16 in.
ID:
6 in., plus or minus 1/16 in.
Working Pressure:
100 psig
End Adapters:
Hose to D.G. adapters per (97403) 13226E8269,
aluminum 6061-T6
Cover:
Synthetic rubber, not less than 5/64 in. thick
Reinforcement:
Cotton or synthetic fiber ply with a helix of
wound steel reinforcing wire
Hose Tube:
Synthetic rubber, not less than 5/64 inch thick
Color:
Sand Matte
Identification:
Manufacturer's name or trade mark, quarter
and year of manufacture, the type, and the
words "MIL-H-370, Type II, Liquid Fuel"
2-28
|
