|
| |
7. DISCUSSION
1.
Before replacing components of the MiniMonitor Kit in the
force all fuel out of the syringe by operating it through
Residual fuel can be removed from the hose by slinging it
carrying case,
several strokes.
in an open area.
2.
For best results, maintain constant flow in the piping system being tested.
Never move upstream valves during a test.
3.
If system pressure is very low, the test can be speeded up by partially
closing a valve downstream of the sample point.
4.
The
0.8
*If
100
standard test membrane for testing kerosene fuels
microns.
you order GTP-1983, you will receive a package of
support pads.
has a pore size of
100 membranes and
*If
monitors ready to use.
you order GTP-1985, you will receive a box of 48 preloaded plastic
5.
The ASTM Method D3830 can be purchased from us by specifying our catalog
No. GTP-3043.
6.
The color chart for Method D3830 can be obtained from us by specifying
our GTP-1074-1.
This is now included in the kit.
7.
Replacement components for the MiniMonitor Kit can be ordered from us:
DESCRIPTION
MiniMonitor Kit, complete, without flushing valve
MiniMonitor Kit, complete, with flushing valve
Monitor Housing only - without flushing valve
Monitor Housing only - with flushing valve
Syringe (used to evacuate plastic monitor after test)
Sampling Probe
Quick Disconnect Coupler
Reducing Bushing 3/8” male to 1/4” female NPT
Reducing Bushing 1/2” male to 1/4“ female NPT
Coupling, Pipe 1/4“ female to 1/4“ female NPT
Bonding and Grounding Hose (male nipple at one end
fits quick disconnect coupler; 1/8” male threaded
fitting at other end fits housing outlet)
Bypass Hose (use in GTP-172 only)
Bypass Tee with check valve (use in GTP-172 only)
Bypass Quick Disconnect
Instruction Booklet
Carrying Case
MODEL NO.
GTP-169
GTP-172
GTP-169H
GTP-172H
GTP-165
GTP-144
SVEC4-4M
RB6-4
RB8-4
C4
GTP-111O
GTP-301
GTP-302C
GTP-1250
GTP-303
84-101
8.
Related Literature - write to us requesting copies.
Aircraft Fuel Sampling
Equipment (Bulletin 68-3) describes sampling kits for permanent installation.
Jet Test QD Coupler (Bulletin 70-14) - a miniature quick disconnect suitable
for permanent installation on fueling nozzles.
Use for performing contamina-
tion tests, Aqua-Glo tests and for checking fuel pressure.
Aqua-Glo Series III Water Detector Kit (Bulletin 82-86) - A highly accurate,
fast test for water in aviation fuels -- measures from 1 to 60 ppm.
Teflon Pipe Thread Sealant Tape (Bulletin 68-6) - To seal sample connection
pipe threads.
|
