TM 10-5430-242-12&P 0009 00 0009 00-5 Change 1 Table 1.  Operator Preventive Maintenance Checks and Services for Fuel Storage Tank (continued). ITEM NO. INTERVAL MAN- HOUR ITEM TO BE CHECKED OR SERVICED PROCEDURE EQUIPMENT NOT READY/ AVAILABLE IF: 8 Before Tank Drain Fitting Assemblies (8) Check drain plug, drain hose, or ball valve for damaged or missing parts.   Drain plug, drain hose, and drain ball valve are missing, not properly connected, or damaged. 9 Before Filler/Discharge Assembly (9) Check cam-lever arms and elbow for damage. Cam-lever arms   damaged or missing. Elbow body is cracked or worn. 10 During Installation Area Inspect the installation area for sticks and other sharp objects. Sharp objects are present. 11 During Tank (1) Inspect for tears, punctures, or leaks. If torn or punctured, perform emergency repairs (WP 0006 00). Tank has tears, punctures, or leaks that cannot be repaired. 12 During Filler/Discharge Gate Valve (2) or Ball Valve (3) Check for bent or binding stem, broken hardware, and leakage. Check gasket and cam-lever arms for damage.   Stem, hand-wheel or handle, gasket, or cam-lever arms are damaged, missing, or leaking. 13 During Filler/Discharge Hose Assembly (4) Check hose for leaks, cuts, and tears.  Check fittings for distortion or damage. Hose assembly leaks or is damaged. 14 During Tank Drain Ball Valve (5) Check for bent or binding stem, broken handle, and leakage.   Stem or handle is damaged, missing, or leaking. 15 During Tank Drain Hose Assembly (6) Check hose for leaks, cuts, and tears. Check fittings for distortion and damage. Hose assembly leaks or is damaged.